About

A studio for paint protection

MAS Project is a studio in Osborne Park, Perth, that protects, changes and cares for car paint. We fit paint protection film, colour PPF and window tint, and we apply ceramic coatings, correct paint and detail cars.

5.0· 115 Google reviews

A car under studio lights. This is not a photograph of the street address.

In numbers

The studio, in figures

MAS Project has been open for four years. The team behind it brings more than 30 years of combined experience.

From 115 Google reviews: 5.0★
Combined experience: 30+ yrs
Cars through the studio: 1,000+
Studio with 6 lit bays: 800+ m²

Products

The films and coatings we choose

We keep a short list of products and fit them often, so we know how each one behaves. For clear PPF that is Defcon Glanz (gloss) and Defcon Frozen (satin). For colour PPF it is Defcon Spectra and Inozetek Dynamic PPF. Coatings are from Gtechniq, with Labocosmetica Armorius on film, and window tint is Defcon CoolVue or ZR Films NOVA.

Every job on our work page lists the product used, so you can see it on a real car.

A satin silver Porsche in the studio, with a Defcon Frozen satin film box in front — Satin paint protection film, with the Defcon Frozen box in the frame. A PPF example, not a ceramic coating.

How we work

How a PPF job runs

Hands fitting clear film over a curved blue guard — Clear film being worked onto a curved panel. Not every job includes the same preparation.

01 · At drop-off
Inspect under studio light
Every panel is checked under the light bars before anything is cut, so marks are found now, not after the film is on.
- Every panel
- Under the light bars
02 · Before any film
Decontaminate and prep
A full wash, then iron and tar removal and a panel wipe, so the film bonds to clean clear coat.
- Full wash
- Iron and tar removal
- Panel wipe
03 · Only if the paint needs it
Correct where it is needed
Film locks in whatever is underneath. Where the paint needs it, we polish first and tell you why.
- Machine polish
- We tell you why first
04 · Most of the time in the studio
Cut and fit
Badges and trim come off where the film needs to tuck behind them. The film is cut on a computer plotter or by hand, laid wet and worked in panel by panel, with every edge and corner wrapped so the film line stays out of sight.
- Parts removed where needed
- Plotter or hand cut
- Edges and corners wrapped
05 · Before pick-up
Final inspection
The car goes back under the lights for a last check. We register the film on Defcon’s e-Warranty and walk you around the car before you drive away.
- Back under the lights
- e-Warranty registered
- Walk-around at handover
06 · Two weeks later
Two-week check
Leave the car unwashed for the first week while the film settles. At two weeks we ask you to bring it back so we can check every edge for lifting or peeling and fix anything straight away.
- No wash for the first week
- Edges checked for lifting

The studio

Inside the studio

Six working bays under studio lights, in more than 800 square metres.

Shelf of paint protection film installation products, cleaners and gel bottles against a pegboard wall

Gloved hand working a squeegee around a door handle while installing film on a wet panel

Mercedes-Maybach S 580 with green colour PPF being laid over the white bonnet during installation

Boxes of gloss and satin paint protection film stacked on a workshop shelf beside care products

Close-up of angular satin grey body panels meeting at a sharp crease under studio light

Front view of a Toyota LandCruiser 78 Troop Carrier in grey colour-change Inozetek Dynamic PPF

Paint protection film packaging with Made for Australia and Australian Owned marks in the studio

Close-up of a light grey satin panel curving towards a dark window frame

Porsche 911 (997) tail-light close-up with reflections in the corrected, Gtechniq-coated black paint

Visit

Find us

The studio is at 2/38 Sarich Court, Osborne Park, a short drive from the Mitchell Freeway. Call 1300 321 688, text 0483 929 328, or send us a quote request.

Customers come to us from across Western Australia. If you are coming from outside Perth, see how a visit works.